Back to the main page Back to category Sailing Boats

boat details

Westerly Griffon MK1 Project Yacht & Cradle

Estimated price for orientation: 850 $

Category: Sailing Boats
Class:











Description
Type: Cruiser Hull Material: Fiberglass
Length (feet): 26 Keel: Fixed


Westerly Griffon MK1 Project Yacht & CradleTHIS IS A HONEST DESCRIPTION OF THIS YACHT, PLEASE VIEW BEFORE BIDDING.FOR SALE Westerly Griffon MK1 Project Yacht & CradleThe Westerly Griffon yacht Link below:
http://www.yachtsnet.co.uk/archives/westerly-griffon/westerly-griffon.htmWork needed to be done to complete the refit.New Port Lights (supplied)
New Iroko Toe rails (supplied)
New Iroko Rubbing Streaks (supplied)
New Grab Handles X 4.
Sea Cocks Blakes, Heads, service or replacing.
Sea Cocks, Intake needs replacing, Waste water needs replacing.
Rudder, new bolts, (rusty bolts)
Keel bolts need checking, possible replacing them.
New lateral floor strengtheners have been rebuilt.
New Sole flooring in main cabin.
Finish off the rebuilding of the cabin fittings, (small amount) either finish with varnishing or painting.
Rewire small power, lights, navigation & communication etc.Above the water line, The gelcoat has been test polished, with poor
results, In my option it needs painting now.
 
Below the water line, all anti foul removed & painted with Jotun Silver
grey. Keel, Striped back to cast iron, washed in acid, painted with 8
coats of Hammerite.New Full set of Cushions, supplied (four damaged as seen in photo)Sails, Both need servicing, two small holes in Genoa, main sail ok,
GN-55 could of been the original sail number ?Standing rigging, looks better than it is, hasn't been used.
Running rigging, all needs replacing. VOLVO PENTA MD7A Engine.The engine is not seized up, can be turned over by hand. Could be
rebuilt with some mechanical knowledge. It needs a new alternator
(possible fit a car alternator) and the some welding on the cracked
manifold. Been kept in dry storage.If you want to view this Yacht, viewing day will be the 3rd June 2017,
between 10am and 2pm, at Port Penrhyn, Bangor, North Wales.Please message me if you want to view, please don't show up without letting me know, as I may
not be there.