Back to the main page Back to category Sailing Boats

boat details

Newbridge 28ft Coastal Sailing Yacht - Fully equipped and ready to sail

Estimated price for orientation: 2 850 $

Category: Sailing Boats
Class:











Description
Condition: Used: An item that has been previously used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Year: 1976
Type: Cruiser Hull Material: Fiberglass
Make: Newbridge Rigging: Sloop/Cutter
Model: Spinner 28 Keel: Fixed
Engine Type: Yanmar 1GM10 Length (feet): 28


Currently in the water at Brighton Marina. The following jobs have been done since the original description which is included below:
Lifted, scrubbed & anti-fouled - Feb 2017New mainsheet traveller blocks & lines - March 2017Oil & fuel filters changed, fuel system bled and new vee belt fitted - April 2017New forestay, genoa halyard & furling line - April 2017New genoa sheets - April 2017USB Charging ports fitted to chart table - April 2017New full gas bottle fitted - April 2017
Having just spent a week on board sailing almost 200 miles in and around the Solent everything is shook down and ready to go, she's a lovely boat to sail and just needs some TLC to make someone very happy. There are some cosmetic jobs (stripping and repainting the top deck & recovering the upholstery) that still need doing and the engine could do with a decent service as it can be slow to start when cold but runs well once going. All photos are from within the last 3 months (the first 5 within the last 2 weeks).Marina fees are paid up until 27th May 2017, after which you would need to move or make arrangements for a mooring with the marina office. I will send the documentation (bill of sale, builders certificate etc), along with a few bits I have with me via first class recorded delivery upon receiving payment.
------------------------------------------------------------------------------------------------
**PLEASE NOTE** Unfortunately I'm unable to accompany individual viewings as I'm not based locally and as such she is sold 'as is where is'. It is possible to view from alongside the pontoon in Brighton Marina and if she hasn't sold by the end of next week I may look to arrange a day for doing viewings but would prefer to do it remotely hence the reduced price. ------------------------------------------------------------------------------------------------
Spinner 28 designed by Mike Henderson and built in 1976 by Newbridge Boats Ltd.
Key features: 
Set up for short/single handed sailingSlab reefing main, lazy jacks and stack awayRoller reefing genoaFull cockpit canopy and spray hoodEberspacher D2 blown air heating1 year Sea-start marine breakdown cover included
Dimensions: 
27’ 8” (8.5m) overall length23’ 11” (7.3m) waterline length9’ 9” (3m) beam4’ 8” (1.4m) draft5,600lbs displacement2,900lbs ballast45 litre stainless steel fuel tank100 litre Plastimo flexible water tankAft CockpitBermudan Sloop-masthead rigFin keel
Construction:
Dark blue GRP hull. Non skid off-white deck. Mahogany and mahogany faced marine plywood interior joinery. Bolt on cast iron fin keel. Transom hung spade rudder with tiller steering.
Accommodation:
Six berths comprisingTwo quarter berths aft.Two 6ft+ settee berths in saloon with trotter boxes.Two pipe cots.5’ 9” standing headroom.Cream vinyl upholstery, (some in need of recovering).Blakes ‘Lavico’head, fwd with washbasin & ‘Whale’ pump fresh water tap.Galley with ‘Plastimo Neptune’ gimballed 2 burner hob and grill, plus a stainless steel and hand ‘Whale’pump fresh water tap.Brass clock.Brass barometer.Good size chart table with chart storage.Drop leaf cabin table with bottle storage.Kenwood KRC277 radio/cassette and stereo speakers.Shore power with mains sockets in forepeak, main cabin, quarter berths and cockpit lockers (waterproof sockets). New 2013.Eberspacher D2 blown air heating (4 outlets) installed 2014.
Sails & Rig:
Stainless steel standing rigging, all replaced in 2013.Terylene running rigging - replaced April 2017Silver anodized alloy deck stepped mastSlab reefing boom with ‘Quay Sails’ lazy jacks & stack away (new 2009).Nicholson Hughes mainsail, remade for stackaway in 2009.Nicholson Hughes roller reefing genoa, remade and new UV strip fitted 2013
Deck Equipment:
25lb plough anchor with chain and warp.Danforth anchor with chain and warp.5 mooring cleats.Plastic coated stainless steel guard wires. (recently renewed).Alloy stanchion bases with tapered stanchions.Jackstays. 25mm double thickness webbing.Headsail tracks with roller cars.Full Nav lights including masthead tricolour.Stainless steel pulpit.Stainless steel pushpit.Single roller stemhead fitting.Perforated alloy toerails.‘X’ section mainsheet track with car and tackles.2 Lewmar headsail two speed winches.Mast mounted halyard winch.Numerous fenders, including 2 at bow.Navy blue, braid on braid, mooring warps.Teak grab rails.Two ventilators.Cockpit cushions.Instrument covers.Tiller extension.4-man offshore liferaft (expired 2015)Blue cockpit sprayhood with stainless steel frame (new 2014 from Quay Sails)Blue FULL cockpit canopy (new 2014, from Quay Sails).Firdell Blipper Radar Reflector.Horseshoe lifebuoy & Dan buoy.2-man inflatable kayak & pump (which I have been using as a tender).
Engine:
Yanmar 1GM10 single cylinder diesel engine, (raw water cooled) mounted on flexible mounts.Single lever controls.2.6:1 mechanical reduction gearbox with direct shaft drive to a fixed 3 blade prop.Fitted with a PSS shaft seal.Electric/hand starting.85amp lead acid battery with isolator.Lots of spares included (Oil / fuel filters, engine oil, impellers).1 year Sea-start marine breakdown cover included.
Instruments:
Icom DSC VHF radio (new 2014).Plastimo Contest 101 bulkhead steering compass.Stowe Navigator II log/speedo - Needs replacingSeafarer 501 echo sounder.