Back to the main page Back to category Jet Boats
boat details
1997 Shuttlecraft
Estimated price for orientation: 700 $
Category: Jet Boats
Class:
Description Condition: Used Year: 1997 Make: Shuttlecraft
This Shuttlecraft is 14ft. long with 3 storage compartments. Has a cd stero with 2 speakers. Craft also has a depth-fish finder. This Shuttlecraft has a bracket for a trolling motor. .Boat also has running lights plus a 12 volt battery with case included. A blue canopy is included as well. Shuttlecraft has rails which will fit a 1997 Yamaha Waverunner Venture 760 . Others could fit but you would have to check it first. A jet ski fits into the rails and buts up to the front. It is held by a strap in the back of Shuttlecraft. Trailer is included and in very good shape. 4 Ply wiring and 2 inch ball hitch. Shuttlecraft and Shuttlecraft trailer both have Illinois titles. The seats have some worn spots and yellow tape on one of them but the Shuttlecraft overall is in good condition. Spare tire for trailer is included as well. A Jet Ski is not included in this. A automatic bilge pump is included too. Lastly the boat has Shuttlecraft on the sides but on the front has Curt's Craft decal. Having 2 clear titles is a very important thing when you purchase a boat.....I will include a older 25lb. thrust sears trolling motor and it only works in forward. This is 12 volt. No battery is included for this. 3 Blue-purple tanning boards will be included too. This boat gives you the option of parking the boat then going on the jet ski (not included). This boat was powered by a 1996 Tigershark Monte Carlo 770cc. The rails on this boat measure 44 1/2 to 46 inches in the center so that is what is needed for the width measurement for the lip on a jet ski to slide in. At the end of the boat it gets wider to 47 inches at the end of the rail. It is 8ft. from the front to the end of the boat but a 9 ft long jet ski is ok. Hopefully these new pictures I put up will help you in seeing if your jet ski could work. I have lowered the price as this does not include a jet ski with it. Once I sign over the titles this is a done deal. I also put pictures of my jet ski and it is over 9ft long and 47 inches wide in back but it is 45 1//2 wide in the middle. The lip is about 1 1/2 inches high on sides which goes into the rail. So what I am saying is if a jet ski is 43 inches wide it is too skinny and if 47 is is too wide at the center.
Description
| Condition: | Used | Year: | 1997 |
| Make: | Shuttlecraft |
This Shuttlecraft is 14ft. long with 3 storage compartments. Has a cd stero with 2 speakers. Craft also has a depth-fish finder. This Shuttlecraft has a bracket for a trolling motor. .Boat also has running lights plus a 12 volt battery with case included. A blue canopy is included as well. Shuttlecraft has rails which will fit a 1997 Yamaha Waverunner Venture 760 . Others could fit but you would have to check it first. A jet ski fits into the rails and buts up to the front. It is held by a strap in the back of Shuttlecraft. Trailer is included and in very good shape. 4 Ply wiring and 2 inch ball hitch. Shuttlecraft and Shuttlecraft trailer both have Illinois titles. The seats have some worn spots and yellow tape on one of them but the Shuttlecraft overall is in good condition. Spare tire for trailer is included as well. A Jet Ski is not included in this. A automatic bilge pump is included too. Lastly the boat has Shuttlecraft on the sides but on the front has Curt's Craft decal. Having 2 clear titles is a very important thing when you purchase a boat.....I will include a older 25lb. thrust sears trolling motor and it only works in forward. This is 12 volt. No battery is included for this. 3 Blue-purple tanning boards will be included too. This boat gives you the option of parking the boat then going on the jet ski (not included). This boat was powered by a 1996 Tigershark Monte Carlo 770cc. The rails on this boat measure 44 1/2 to 46 inches in the center so that is what is needed for the width measurement for the lip on a jet ski to slide in. At the end of the boat it gets wider to 47 inches at the end of the rail. It is 8ft. from the front to the end of the boat but a 9 ft long jet ski is ok. Hopefully these new pictures I put up will help you in seeing if your jet ski could work. I have lowered the price as this does not include a jet ski with it. Once I sign over the titles this is a done deal. I also put pictures of my jet ski and it is over 9ft long and 47 inches wide in back but it is 45 1//2 wide in the middle. The lip is about 1 1/2 inches high on sides which goes into the rail. So what I am saying is if a jet ski is 43 inches wide it is too skinny and if 47 is is too wide at the center.