Back to the main page Back to category Power Boats
boat details
21FT SEAFARER FISHING BOAT PROJECT
Estimated price for orientation: 650 $
Category: Power Boats
Class:
Description Manufacturer: Colvic Beam (Feet): 7ft 6ins Type: Cuddy Cabin Trailer: Not Included Length (Feet): 21ft
A 21ft Seafarer fishing boat project.This 21ft Seafarer was manufactured by Colvic Craft. It was designed to be a semi displacement fishing boat and when new was advertised with a speed of around 15 - 16 knots with an inboard engine and outdrive of about 80hp. The engine and outdrive have been removed.The cabin and cockpit area require a general tidy up. The floorboards need attention and some may need replacing. The other woodwork in the cabin needs refitting.The box at the rear of the cockpit needs sorting according to your personal use as this is where the engine was fitted.The wheelhouse is particularly useful as it provides shelter when seated at the helm and it also provides a small toilet compartment forward of the steering position and a cooker/sink space on the opposite side. It has a canopy which needs some attention.An outboard of 10 - 50hp should give acceptable performance depending on your needs.There is some damage to the gunwale flange on both sides (about 18inches long), where the boat has been lifted but the gunwale rubber is good.A worthwhile project.The hardtop makes it particularly good for shelter when fishing.Viewing recommended.Collection only - cash preferred please.Assistance with loading onto your trailer is available.Trailer and engine not included
Description
| Manufacturer: | Colvic | Beam (Feet): | 7ft 6ins |
| Type: | Cuddy Cabin | Trailer: | Not Included |
| Length (Feet): | 21ft |
A 21ft Seafarer fishing boat project.This 21ft Seafarer was manufactured by Colvic Craft. It was designed to be a semi displacement fishing boat and when new was advertised with a speed of around 15 - 16 knots with an inboard engine and outdrive of about 80hp. The engine and outdrive have been removed.The cabin and cockpit area require a general tidy up. The floorboards need attention and some may need replacing. The other woodwork in the cabin needs refitting.The box at the rear of the cockpit needs sorting according to your personal use as this is where the engine was fitted.The wheelhouse is particularly useful as it provides shelter when seated at the helm and it also provides a small toilet compartment forward of the steering position and a cooker/sink space on the opposite side. It has a canopy which needs some attention.An outboard of 10 - 50hp should give acceptable performance depending on your needs.There is some damage to the gunwale flange on both sides (about 18inches long), where the boat has been lifted but the gunwale rubber is good.A worthwhile project.The hardtop makes it particularly good for shelter when fishing.Viewing recommended.Collection only - cash preferred please.Assistance with loading onto your trailer is available.Trailer and engine not included