Back to the main page Back to category Motorboats
boat details
6.5m DIY Aluminum Boat Kit
Estimated price for orientation: 14 500 $
Category: Motorboats
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item. See the seller's listing for full details. See all condition definitions- opens in a new window or tab Year: 2016 State: VIC Hull Material: Aluminium Length: 6.5m Brand: Designer Boats Australia
6.5m DIY Aluminum Boat KitThis boat is for the serious fisherman/diver that wants a reliable strong boat. It has a sleek sharp bow entry, flattening out to an 11 degree dead rise and a solid bar running along the keel. The boat has been designed to skim off the surface quickly and slice through the toughest waves and chop. Being 11 degree dead rise at the transom makes, this boat very stable while stationary. The sides are 700mm high and it has a very roomy self draining deck that drains through scuppers onto the rear platforms. The cabins large with enough scope for you to design your own roomy storage boxes or get creative and design a bed under the bonnet. The floor is checker plate with an in floor kill tank, and a rear locker. The transom has been designed to add your own live bait tank or burley muncher. A 170 litre fuel tank contained in its own sealed coffer tank compartment will the range to just about get you anywhere. Fuel tank is included in the kit. PARTICULARS DISPLACEMENT: 1131 Kgs (S.W) LENGTH OVERALL 6.510 m LENGTH LOAD WATERLINE: 5.315 m BEAM AT DECK: 2.386 m BEAM AT DWL: 1.838 m MAX FREEBOARD 1.047 m DEAD RISE AT TRANSOM 11.5^ DRAFT: .268 m ENGINE: 200 HP (MAX) FUEL: 170 LITRES This boat comes with all hull plates precut with lines, part numbers and some alignment tabs to help during construction. Extrusions are supplied and you simply cut them to the required sizes from the drawings and weld in place. The kit includes over 60 construction drawings explaining how to build and welding schedule with distortion control measure included. The kit includes an Australian builders Plate, HIN number and access to technical support from the Naval Architect during the build.To see promo or example drawings go to.http://www.designerboats.com.au/alum-boat-designs/6-5m-harlequin-sweet-lips-hard-top-runabout/ Being a kit with a 5mm bottom, 4mm sides and 3mm internals, it is easier to build and more forgiving.If you would like this boat and not feeling confident of building it, I can put you in touch with someone to build it for you.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item. See the seller's listing for full details. See all condition definitions- opens in a new window or tab | Year: | 2016 |
| State: | VIC | Hull Material: | Aluminium |
| Length: | 6.5m | Brand: | Designer Boats Australia |
6.5m DIY Aluminum Boat KitThis boat is for the serious fisherman/diver that wants a reliable strong boat. It has a sleek sharp bow entry, flattening out to an 11 degree dead rise and a solid bar running along the keel. The boat has been designed to skim off the surface quickly and slice through the toughest waves and chop. Being 11 degree dead rise at the transom makes, this boat very stable while stationary. The sides are 700mm high and it has a very roomy self draining deck that drains through scuppers onto the rear platforms. The cabins large with enough scope for you to design your own roomy storage boxes or get creative and design a bed under the bonnet. The floor is checker plate with an in floor kill tank, and a rear locker. The transom has been designed to add your own live bait tank or burley muncher. A 170 litre fuel tank contained in its own sealed coffer tank compartment will the range to just about get you anywhere. Fuel tank is included in the kit. PARTICULARS DISPLACEMENT: 1131 Kgs (S.W) LENGTH OVERALL 6.510 m LENGTH LOAD WATERLINE: 5.315 m BEAM AT DECK: 2.386 m BEAM AT DWL: 1.838 m MAX FREEBOARD 1.047 m DEAD RISE AT TRANSOM 11.5^ DRAFT: .268 m ENGINE: 200 HP (MAX) FUEL: 170 LITRES This boat comes with all hull plates precut with lines, part numbers and some alignment tabs to help during construction. Extrusions are supplied and you simply cut them to the required sizes from the drawings and weld in place. The kit includes over 60 construction drawings explaining how to build and welding schedule with distortion control measure included. The kit includes an Australian builders Plate, HIN number and access to technical support from the Naval Architect during the build.To see promo or example drawings go to.http://www.designerboats.com.au/alum-boat-designs/6-5m-harlequin-sweet-lips-hard-top-runabout/
Being a kit with a 5mm bottom, 4mm sides and 3mm internals, it is easier to build and more forgiving.If you would like this boat and not feeling confident of building it, I can put you in touch with someone to build it for you.