Back to the main page Back to category Bass Fishing Boats
boat details
2008 Cougar Custom Boats
Estimated price for orientation: 10 000 $
Category: Bass Fishing Boats
Class:
Description Condition: Used Year: 2008 Make: Cougar Custom Boats
2008 Cougar Infinity 201 for sale. Boat is a tunnel vee hull and is very fast...80+ mph. Boat was over 50k new and is ready to fish. It does have some gel coat damage on the bottom of the center hull. Just some scratches and one deeper scratch that was resin filled to prevent water infiltration. This repair was done prior to my owning the boat. None of the gel is blistering or anything. Boat is loaded with high end features and ready to fish. Boat has tons of storage , live/bait well etc etc. The pic of the boat in the water is from the previous owner. He kept the optimax and I re-powered the boat as listed below. Merc 2.5L 240HP ported motor with under 40 hours on full rebuild. Motor has the best of everything and was built by a pro10" Hydrojacker JackplateHydraulic steering and hotfootMotorguide bow mount trolling motorLowrance HDS at the bow on a ram mountGarmin GPS in the dash3 brand new deep cycle batteries and a 3 bank charging systemHydromotive 4-blade stainless propThere is really too many features to list with the boat. If you would like to discuss it please message me and we can go over features and any questions you may have. I have set the BIN at about what I have invested in the boat. The reserve is set at just over half the BIN. I relocated due to work and have not used the boat really at all. NADA on the boat is pushing 25k still. Obviously with the later model motor etc that value would be lower but just as a reference.Trailer has 2 brand new tires and comes with a spare. It has been modified to fit this boat Willing to help with delivery in the midwest.
On Aug-03-16 at 13:37:24 PDT, seller added the following information:I have been asked for more engine details -Skeleton of the engine is a mid 90's 200 XRI. Tilt and Trim has been rebuilt.20" Mid section with liner removed and has been been relieved similar to the bass midsSolid motor mounts26P Hydromotive Quad PropLower unit is a 1.86 gear ratio XR6 unit. It has been coned and has fresh lube and water pump.All plastics in good shape without any cracksPowerhead is a 97 Sportjet 175 block. Porting is stock mercury porting is said to be the same as the 245 Carb porting. Has under 40 hours on complete rebuild with new crank and vertex pistons. Oil injection deleted. Carbs rebuilt and synced. Timing module deleted and timing set to a conservative 23 degrees. 38cc heads so pump gas safe.This engine is considered a 240HP outboard in performance circles and run perfectly. It is 400 lbs and you won't have any out of warranty Optimax bills to deal with. Just add gas oil and go.Engine was built by Chip Solms out of Orlando and machine work was done by his machinist. I will be adding many more pictures as I get them. Don't hesitate to ask any questions.
Description
Condition: | Used | Year: | 2008 |
Make: | Cougar Custom Boats |
2008 Cougar Infinity 201 for sale. Boat is a tunnel vee hull and is very fast...80+ mph. Boat was over 50k new and is ready to fish. It does have some gel coat damage on the bottom of the center hull. Just some scratches and one deeper scratch that was resin filled to prevent water infiltration. This repair was done prior to my owning the boat. None of the gel is blistering or anything. Boat is loaded with high end features and ready to fish. Boat has tons of storage , live/bait well etc etc. The pic of the boat in the water is from the previous owner. He kept the optimax and I re-powered the boat as listed below. Merc 2.5L 240HP ported motor with under 40 hours on full rebuild. Motor has the best of everything and was built by a pro10" Hydrojacker JackplateHydraulic steering and hotfootMotorguide bow mount trolling motorLowrance HDS at the bow on a ram mountGarmin GPS in the dash3 brand new deep cycle batteries and a 3 bank charging systemHydromotive 4-blade stainless propThere is really too many features to list with the boat. If you would like to discuss it please message me and we can go over features and any questions you may have. I have set the BIN at about what I have invested in the boat. The reserve is set at just over half the BIN. I relocated due to work and have not used the boat really at all. NADA on the boat is pushing 25k still. Obviously with the later model motor etc that value would be lower but just as a reference.Trailer has 2 brand new tires and comes with a spare. It has been modified to fit this boat Willing to help with delivery in the midwest.
On Aug-03-16 at 13:37:24 PDT, seller added the following information:I have been asked for more engine details -Skeleton of the engine is a mid 90's 200 XRI. Tilt and Trim has been rebuilt.20" Mid section with liner removed and has been been relieved similar to the bass midsSolid motor mounts26P Hydromotive Quad PropLower unit is a 1.86 gear ratio XR6 unit. It has been coned and has fresh lube and water pump.All plastics in good shape without any cracksPowerhead is a 97 Sportjet 175 block. Porting is stock mercury porting is said to be the same as the 245 Carb porting. Has under 40 hours on complete rebuild with new crank and vertex pistons. Oil injection deleted. Carbs rebuilt and synced. Timing module deleted and timing set to a conservative 23 degrees. 38cc heads so pump gas safe.This engine is considered a 240HP outboard in performance circles and run perfectly. It is 400 lbs and you won't have any out of warranty Optimax bills to deal with. Just add gas oil and go.Engine was built by Chip Solms out of Orlando and machine work was done by his machinist. I will be adding many more pictures as I get them. Don't hesitate to ask any questions.
On Aug-03-16 at 13:37:24 PDT, seller added the following information:I have been asked for more engine details -Skeleton of the engine is a mid 90's 200 XRI. Tilt and Trim has been rebuilt.20" Mid section with liner removed and has been been relieved similar to the bass midsSolid motor mounts26P Hydromotive Quad PropLower unit is a 1.86 gear ratio XR6 unit. It has been coned and has fresh lube and water pump.All plastics in good shape without any cracksPowerhead is a 97 Sportjet 175 block. Porting is stock mercury porting is said to be the same as the 245 Carb porting. Has under 40 hours on complete rebuild with new crank and vertex pistons. Oil injection deleted. Carbs rebuilt and synced. Timing module deleted and timing set to a conservative 23 degrees. 38cc heads so pump gas safe.This engine is considered a 240HP outboard in performance circles and run perfectly. It is 400 lbs and you won't have any out of warranty Optimax bills to deal with. Just add gas oil and go.Engine was built by Chip Solms out of Orlando and machine work was done by his machinist. I will be adding many more pictures as I get them. Don't hesitate to ask any questions.