| Year: || 1985 || Engine Type: || Single Outboard |
| Make: || Boston Whaler || Engine Make: || Evinrude Engine |
| Model: || Super Sport || Engine Model: || 70 |
| Length (feet): || 17.6 || Primary Fuel Type: || Gas |
| Beam (feet): || 6.3 || Fuel Capacity: || 6 - 10 Gallons |
| Hull Material: || Air Injected Fiberglass || Hull ID Number: || BWCJ5942K485 |
| Trailer: || Included || For Sale By: || Dealer |
| Use: || Fresh Water |
HELLO AND WELCOME TO OUR AUCTIONTODAY WE HAVE A VERY RARE AND DESIRABLE BOATIT IS A 1985 BOSTON WHALER SUPERSPORTONE OF THE LAST BOSTON WHALERS STILL BUILT IN BOSTON, USA IN 1985!IT IS 17.6 FEET LONGTHE HULL IS ORIGINAL AND HAS NEVER BEEN PAINTED!IT HAS BEEN IN FRESHWATER AND GARAGE KEPT SINCE NEWIT IS IN EXCELLENT CONDITIONSIDE CONSOLEFRONT BOW CUSHIONSSIDE RAILSSEAT CUSHIONSTHE BOAT RUNS PERFECT AND IS EASY TO HANDLEIT HAS A GREAT SET UP FOR SEATING, I'VE HAD 7-8 PEOPLE COMFORTABLYANDLEGENDARY BOSTON WHALER STABILITYTHE 70 HP EVINRUDE RUNS SMOOTH AND REALLY MAKES THE BOAT MOVEWE ADDED A 9.9HP CRAFTSMAN FOR SLOW LAKE CRUISINGGAS TANKS, ANCHOR AND FISH FINDER/DEPTH GUAGE INCLUDEDSEAT CUSHIONS INCLUDED BUT SHOW SIGNS OF WEARTHE EZ LOADER TRAILER IS IN GREAT CONDITION IT HAS NEW WHEEL BEARINGS AND NEW TIRESTHE TRAILER IS ROAD READYTHE BOAT IS WATER READYWE ARE AUTOLEX DEALERSHIPS, INC. A FAMILY OWNED AND OPERATED CAR DEALERSHIP AND AAA APPROVED VEHICLE SERVICE CENTER FOR 18 YEARS AT OUR CURRENT LOCATION.WE HAVE BEEN ON EBAY SINCE 1999!THIS WAS THE OWNERS BOAT BUT LACKS THE TIME TO REALLY ENJOY ITHIS LOSS IS YOUR GAINWE CAN HELP ARRANGE(NOT PAY FOR) SHIPPING IF YOU NEED ITCALL US WITH ANY QUESTIONS OR STOP IN AT:AUTOLEX DEALERSHIPS, INC725 N. 15TH STREETALLENTOWN, PA 18102610-740-3005MON-FRI 11AM-6PMSAT 11AM-2PMBID AND BUY WITH CONFIDENCE!DONT MISS OUT ON THIS HARD TO FIND BOAT IN ITS ORIGINAL CONDITIONBOSTON WHALER PREMIUM BUILD POINTS OF INTEREST
Unlike most molds, the Whaler hull mold is comprised of two pieces. Each is coated with gelcoat and a skin coat of fiberglass before multiple layers of bi- and tri-directional fiberglass material is applied. The two molds are then latched together and a precise amount of liquid closed-cell foam is poured into the area between the hull molds.The foam expands and fills the space between the molds permanently bonding the halves into a single, inseparable unit. This results in an extremely strong and unsinkable hull. Pound your fist on the side of a Whaler versus another boat and you'll see what we mean.
Little details make a big difference, especially in a tough commercial or military environment. All Whalers use 316-L deck hardware(much tougher than the 304 stainless steel in most marine applications), and we even take an extra step to chrome-plate our screws for additional corrosion resistance. The nonskid pattern is molded right into the deck, not added later. The electrical wiring consists of tinned copper, not bare copper, and the wiring connectors are heat shrunk, not just clamped, to virtually eliminate the possibility of moisture entering the wire core.T-tops, seating, tow posts, and cleats are backed by Whaleboard, or aluminum, which are impervious to rot from water intrusion and have a screw retention 5 times the strength of wood.
Whalers aren't technically bulletproof; but they definitely give you one less thing to worry about.
On Jul-08-16 at 14:18:26 PDT, seller added the following information:RESERVE HAS BEEN METTHE HIGHEST BIDDER WILL GET HIS BOAT!