Back to the main page Back to category Other Boats
boat details
97' Avon RIB with 30hp Suzuki 2 stroke engine, fully loaded and MINT
Estimated price for orientation: 3 500 $
Category: Other Boats
Class:
Description Make: Avon
I got this boat as a project and took over a month to refurbish every aspect of this awesome boat. I went thru motor and rebuilt the Carb., put on a new prop, new plugs, lower end serviced, etc.. Boat bottom was sanded and painted with 4 coats of bottom barrier copper paint. Tubes were also taken down and repainted with hypalon paint and then i painted the inside floor with topside paint for boats. New rub rail was installed and then i went thru the controls and helm and redid all cables and steering mechanism. Boat was final assembled then all wires wrapped and properly loomed. Motor battery for electric start was secured as well as gas tank. mounted a tool box up front to frame work for the seats that houses a anchor and air pump to inflate the tubes if they should get low. 12v plug was also installed for a spot light or any 12v acc. It is outfitted with a manuel water pump, foul weather gear for 2, air horn, vhf radio, water container, first aid kit, spare flotation devices approved by coast guard, anchor with bungee line, Ready for open water.. cruises at 30 knots with 2 people(have video of sea trial)Boat is located in port Hueneme CA 93041 inside my work shopit is sitting on a customized galvanized trailer with new lights and new carpeted bunks. No details were spared on this build and everyone that sees it loves the additions I've done
Description
| Make: | Avon |
I got this boat as a project and took over a month to refurbish every aspect of this awesome boat. I went thru motor and rebuilt the Carb., put on a new prop, new plugs, lower end serviced, etc.. Boat bottom was sanded and painted with 4 coats of bottom barrier copper paint. Tubes were also taken down and repainted with hypalon paint and then i painted the inside floor with topside paint for boats. New rub rail was installed and then i went thru the controls and helm and redid all cables and steering mechanism. Boat was final assembled then all wires wrapped and properly loomed. Motor battery for electric start was secured as well as gas tank. mounted a tool box up front to frame work for the seats that houses a anchor and air pump to inflate the tubes if they should get low. 12v plug was also installed for a spot light or any 12v acc. It is outfitted with a manuel water pump, foul weather gear for 2, air horn, vhf radio, water container, first aid kit, spare flotation devices approved by coast guard, anchor with bungee line, Ready for open water.. cruises at 30 knots with 2 people(have video of sea trial)Boat is located in port Hueneme CA 93041 inside my work shopit is sitting on a customized galvanized trailer with new lights and new carpeted bunks. No details were spared on this build and everyone that sees it loves the additions I've done