Here we have a 16ft glassfibre cuddy cabin boat project. The hull and deck are sound but as you can see from the pictures the interior is not. It formerly had an inboard engine but this has been removed and an outboard has been used. There are a couple of areas on the hull where it has been repaired in glassfibre mostly around the stern where the propeller used to be and on the stem but this seems to be quite well done. It has a couple of bilge keels to allow it to take the ground safely, there is a morse type steering system that appears to work. It has a very sturdy pulpit and cleats and with a bit of work this will make a great little fishing boat - if you are handy with a bit of plywood and some glassfibre it is an easy project.It is shown on a trailer but this does not belong to the boat and is not included in the sale, there is no engine or any gear with the boat except as you see in the pictures. You will need a trailer to collect it but I have a telehandler and can load it to your transport for you. Strictly cash on collection, £50 start auction because it has to go so remember a bid will buy it, please make sure you are in a position to complete the sale and remove the boat within 7 days of auction end. Ideally I would prefer that you had a look before you bid to make sure it is what you expect - it is a project and does need work but doubtless it will sell cheaply enough.Please ask any questions and I will do my best to answer them.Thanks for looking!